Rolex Datejust 41 Jubilee Screwdriver Size ?

What Size Screwdriver to apply to Remove Bracelet Links?

This is a common question we go asked a lot.

The answer to that question is that non all watches and bracelets are created equal, and therefore, they need different screwdrivers.

Many watch bracelets use screws for belongings the links together but take in mind that other bracelets use pins and friction to agree them in place. This article, nevertheless, will focus on sentry bracelets, and aid yous find what screwdriver size yous need to remove bracelet links for your watch.

What Size Screwdriver you need to use to Remove Bracelet Links

As mentioned, the answer is that it depends on which watch y'all take. Merely many picket bracelets have screws for which you need a screwdriver with a size of 1.four-one.8mm. Worth adding is that the vast majority of watch bracelets use T-screws.

In addition, it is worth having in listen that generally, yous tin can technically use a screwdriver that is smaller than what your screw head is. Whilst this will generally work, it is non ideal as it can cause harm to the screw, or fifty-fifty make it difficult to unscrew if it sits tightly. Information technology is usually not possible to unscrew sentry bracelet screws if you lot have a screwdriver which is wider than the screw'due south size.

For best results, there should be no play when the screwdriver is moved left or right. This ensures a perfect fit and gives maximum friction within the screw slot to make it as piece of cake equally possible to unscrew the spiral.

Lastly, it is also important to keep in mind that not all screwdrivers are created equal. In fact, in that location is a huge deviation in quality between affordable and premium screwdrivers, and so depending on how much value yous put in your watch, it may be wise to invest in higher quality screwdrivers.

Get a ready of screwdrivers

A skillful solution to this issue is to buy a screwdriver set that contains a number of dissimilar screwdrivers so you tin can remove or add links on most bracelets y'all come up beyond. At that place are plenty of good watch screwdriver kits out there that you lot tin can choose from, and we accept gone through them in particular in this article.

Only if you only need 1 screwdriver and practice non plan to screw on other watches in the virtually hereafter, it may feel a bit superfluous to get a whole set. Below, we go through the ideal screwdriver size to use for some common watches.

Screwdriver sizes for mutual watches

Screwdriver size for Rolex Submariner 40mm 116610LN/114060 (and golden/ gilded and steel variants) bracelet

The screwdriver size used for the Rolex Submariner is 1.6mm. The standard Rolex screw size is ane.6mm, then this is the correct size for nearly Rolex bracelets.

Screwdriver size for Omega Seamaster Diver 300m bracelet

The screwdriver size used for the Omega Seamster Diver 300m is 1.8mm. This also goes for Omega watches such as Speedmaster, Planet Body of water, and many more.

Note that overall, the screws for modern Omegas are the same size, except for a few exceptions. Many also use 1.vi and i.7mm and take reported great success.

Screwdriver size for modern Tudor watches

The common screwdriver size for many modern Tudor watches such equally the Black Bay and Pelagos is 1.4mm. 1.five and one.half dozen have also been reported to piece of work equally well.